Decoder Configuration For both C band and Ku
Band LNB
-----------------
If your configuration is not properly set believe
me you will be searching in vain so therefore
before you start searching for a satellite make
sure you check the configuration and
confirming if its the right settings before you
proceed to locating the signal.
-------------
TAKE NOTE OF THIS
- LNB Power: the LNB power
should always be on.
- Lnb Type: for KU band LnB your LNB type
must be set to Universal
- LNB Frequency: this is one of the tricky part
the default value for Ku band LNB is
9.750/10.600
If for any Reason the above data
are contrary you are sure not to get the signal.
- LNB Power: ON
- Lnb Type: for Cband Lnb your Lnb type
should be Single
- LNB frequency: 5.150
Home 
