በ አንድ ዲሽ ብዙ ሰዎችን(ቲቪ\ሪሲቨር) ማገናኘት፣ ዲሽ መጋራት

ዲሽ መጋራት ክፍል አንድ
ብዙ ጊዜ ሰዎች አንድን ዲሽ ለብዙ ቴሌቪዝኖች ማድረግ ይፈልጉና ከዲሹ ከሚመጣዉ coaxial ገመድ ላይ ልክ እንደ ኤሌክትሪክ ቀጥለው ወደ ሚፈልጉት ተጨማሪ ሪሲቭር ያገናኛሉ፡፡ ሆኖም ቆይተው የሚፈልጉትን እንዳላገኙ ይረዳሉ፡፡ አንደኛው ሪሲቨር ላይ horizontal የሆነ ቻናል ከተከፈት ሌላኛው ላይ vertical የሆነ ቻናል ማየት አይቻልም፡፡ ይህ የሆነበት ምክንያት ከLNBF ባንድ ጊዜ ሊወጣ የሚችለው signal ወይ horizontal polarization አልያም vertical polarization በመሆኑ ነው፡፡ ሁለቱንም በአንድ ጊዜ በአንድ ኬብል አይልክም፡፡የባንድ-ዊድዝ ገደብ ስላለበት፡፡ ስለዚ ሪሲቨሩ ቨርቲካል ሲፈልግ 13ቮልት ሆሪዞንታል ሲፈልግ ደግሞ 18ቮልት በመላክ ለLNBF ኮንትሮል ሲግናል ይልካል፡፡ LNBዉም በታዘዘው መሰረት ወይ ቨርቲካል አልያም ሆሪዞንታል ሞገዶችን ይልካል፡፡ ፖላራይዜሽኑ circular ለሆነም እንደዛው፡፡

ይህን ችግር ለመቅረፍና አንዱ ሪሲቨር ላይ ያለው ቻናል ፖላሪቲ ሲቀየር ሌላዉን እንዳይረብሽ የሚከተሉትን ዕቃዎች እናዘጋጃለን፡፡
1. Dual LNBF
2. Multi switch

ማጋራት የምንፈልጋው ለ ሁለት ሪሲቨሮች ብቻ ከኖነ አንድ Dual LNBF ብቻ ማዘጋጀት ይበቃናል፡፡ ከዛም ከድዋሉ የሚወጡትን ሁለቱን ኬብሎች ወደ ሁለቱ ሪሲቨሮች መዉሰድ ነው፡፡

ማጋራት የምንፈልጋው ከሁለት በላይ ለሆኑ ሪሲቨሮች ከሆነ ግን እንደየፍላጎታችን Multi switch እናዘጋጃለ፡፡
ለምሳሌ እስከ አራት ሪሲቨሮች ለማገናኘት 2x4 Multi switch፣ እስከ ስምንት ሪሲቨሮች ለማገናኘት ደግሞ 2x8 Multi switch ያስፈልገናል፡፡

ከዛ ከDuwal LNBF የሚወጣዉን ሁለቱን ከሁለቱ የMultiswtich port ጋር(13ቮልት እና 18ቮልት የሚል አላችው) እናገናኛለን፡፡ 13 እና 18 ቮልቱን ብናዙዋዙረው ምንም ችግር የለዉም፡፡ ከዛ የMultiswitchውን ወጪ ደግሞ ወደ ሪሲቨሮቻችን አንድ በ አንድ መዉሰድ ነው፡፡ ልብ ይበሉ MultiSwitch እና DISEQswitch በጣም የተለያዩ ነገሮች ናችው፡፡




ከላይ በሚታየው ምስል ላይ ወደ አንደኛው ሪሲቨር ሁለት ኬብሎች ሊሄዱ የቻሉት ሪሲቨሩ ሁለት ኢንፑት ስላለው ነው፡፡ አንድ ቻናል እያየን ሌላውን ለመቅዳት ብንፈልግ ለማለት ነው፡፡ ያለዚያ ግን አንድ ኬብል ብቻ ነው ወደየ ሪሲቨሮቹ የሄዱት፡፡

ጠቃሚ ሆኖ ካገኙት (+)የሚለዉን ይጫኑ፣ አስተያየቶንም ከስር ያስፍሩ፡፡

/KSTAR

---

ተጨማሪ መረጃዎች ስለ DVB-S እና DVB-S2 ለ 12 የተለያዩ ጥያቄዎቻችሁ መልሶች የሪሲቨር ወቅታዊ ዋጋ(**New**) ዲሽ መጋራት ክፍል ሁለት (**New**)

በ አንድ ዲሽ ብዙ ሰዎችን(ቲቪ\ሪሲቨር) ማገናኘት፣ ዲሽ መጋራት የ C band እና KU band ልዩነት ምንድነው? የትኛውስ ይሻላል? የዲሽ ሰረዎች አድራሻ በመላው ኢትዮጵያ(**New**)

ሳተላይት ዲሽ በሰለጠነው ዓለም የሚጠቀሙት ፉት ፕሪንት እና EIRP Card sharing እንዴት ነው ማጋራት የሚቻለው??

---

መረጃው ጠቃሚ ሆኖ ሲያገኙት በስተቀኝ በኩል የሚታየዉን ፕላስ ጫን ያርጉት፡፡

Hi ' Admin ' can i connect a cable comes from Multi switch with disk switch to enable the access of more than one satellite ? thanks

Lexi wrote:

Hi ' Admin ' can i connect a cable comes from Multi switch with disk switch to enable the access of more than one satellite ? thanks

Definately Yes! I will write a descriptive article more on that in few days/weeks.

Don't forget to hit plus to all the posts where you get valuable information from.

kstar 10qqqqqqqq

thanks v.much Admin 4 ur immediate Response & kindness !

---

---

---

ከላይ ቃል በገባሁት መሰረት ብዙ ሳታላይቶችን እንዴት መጋራት እንደሚቻል

እዝህጋ በመግባት-->ዲሽ መጋራት ክፍል ሁለትን<--እንድታዩ ተጋብዛችኋል፡፡

---

---

---

---

ጠቃሚ ሆኖ ያገኙትን መረጃ(post) (+)ን በመጫን ጠቃሚነቱን ይግለፁ፡፡

++++++++++++++++++++…

+++++++++++++++

thanks kstar

is it possible to use DISEQswitch TWICE to CONNECT DIFFERENT lnbs INTO ONE RECIIEVER?

my case: -

I have got it difficult to use a second Disqueswitch to connect cables
coming directly from ONE LNB(dish 1) and two others(2 LNBs) connected into ONE
DISEQswitch and both to be connected to one reciever?


pls tell me how can I use /what kind of switch to use to
connect 3 lnbs (one from different location) to one receiver?

which one is appropriate? is that multi-switch or DISEQswitch

tekdish wrote:

thanks kstar

is it possible to use DISEQswitch TWICE to CONNECT DIFFERENT lnbs INTO ONE RECIIEVER?
...

I am not sure I fully understood your situation.
My take is that, you have 3LNBS(not dual) connected to a DISEQ
and then to a receiver. And you want to find out the possibility of
sharing that with another receiver by introducing another DISEQ.

If the LNBs are not dual, I am afraid you won't be able to do that even if
you introduce a Multy switch.

ዲሽ መጋራት ክፍልስ ሶስት በክፍል ሁለት ላይ ሊያጋጥመን የሚችሉ ችግሮች እና ምፍትሔዎችን ይዞ ይቀርባል፡፡

thank u kstar


YES 3 LNBs, 2 (nile and eutelsat 7A located at front-west side of my house ) already connected to
1 DISEQswitch and THE THIRD LNB ( NSS12,57E -duhock) which is located in the other direction (east -or back side ) of my house

my q is ..then can I CONNECT THE TWO (coming from the FIRST DISEQswitch and the other one,i.e
the NSS 57E) TO another or second DISEQswitch to use the three in 1 receiver?

tekdish wrote:

thank u kstar

YES 3 LNBs, 2 (nile and eutelsat 7A located at front-west side of my house ) already connected to
1 DISEQswitch and THE THIRD LNB ( NSS12,57E -duhock) which is located in the other direction (east -or back side ) of my house

my q is ..then can I CONNECT THE TWO (coming from the FIRST DISEQswitch and the other one,i.e
the NSS 57E) TO another or second DISEQswitch to use the three in 1 receiver?

I see what you want. You want to cascade diseq switches(more like taking the output of one diseq in to the other as input). There is a possibility of doing that, but you need swithces that are different. To cascade swithces you need some of them to be uncommitted type. Those types of switches are quite expensive and not readily available in ethiopian markets.

So my advice for you is to take the output of the LNB from the NSS with a longer cable and connect it to the diseq swith on the other side of your house. And adjust the Port setting of NSS in your recevier satallite settings. I am assuming you already have a cable running from the diseq switch to your receiver and a 4x1 diseq switch. If your switch is a 2x1 change it to 4x1, they are cheap(45-50 birr).

+++

now, I am well satisfied with your explanation
I 'll do it as I already had 4x1 DISQUE switch  for the eut 7a A and Nile

Thank you again.

hope ,we  will read more on using the switches (uncommitted type). as I wanted to use.

TNX broya

የቴሌብዥን መደብር ለይ ብዙ TVወች በአንድ resiver ሆነው ተመሳሳይ ምስል አላቸው , What system is that bro