Eurostar 9700 Gold +

Dear sami first of all i would like to thanks for all ur best collaboration and noble thinking of u then i do have a question how do i install the software to my eurobox 9700g0ld++ reciever because it does not recieve flash please tell me how to do it ! thanks for generosity.

John Benhur wrote:

Dear sami first of all i would like to thanks for all ur best collaboration and noble thinking of u then i do have a question how do i install the software to my eurobox 9700g0ld++ reciever because it does not recieve flash please tell me how to do it ! thanks for generosity.  

If you have the software, use RS232 cable

Looks like there is a huge appetite for this particular firmware(Eurostar Eurobox EB-9700 Gold +).

I here by poste the firmware for the reciever and you are welcome to download and use it.
you are always advised to first damp your reciver so that you would restore it back to where it was in any unusuall circumstances.
For those who are interested, I have also uploaded Hyperterminal(windows serial comunication and telenet program). You can always google and get a ton of information in how to use Hyperterminal as a Loader with RS232 cable. Also know that you can also home-made this cable from regular wires with minimal effort.
Though not asked in this forum, I also uploaded the firmware for Eurostar Eurobox EB-9700 plus(Note: there is no Gold on this one )

Eurostar Eurobox EB-9700 Gold +	http://s000.tinyupload.com/?file_id=08839434196919617605
Eurostar Eurobox EB-9700 Plus	http://s000.tinyupload.com/?file_id=02434390464761561561
HyperTerminal	http://s000.tinyupload.com/?file_id=05362089048320628639

***If you happen to have a better loader for this product please do not hold back from sharing.



Use null modem cable (crossed connection for RS232)
2<->3
3<->2
5<->5

The setting on hyperterminal is as follows
File>Properties>Configure..
Bits per second : 115200
Data Bits : 8
Parity : None
Stop Bits : 1
Flow Control : None

Now connect the RS232 with your reciver and see if you could get some text on the terminal while turning the reciver on.

Turn the receiver back off once again.

Transfer>sendFile..
Attach the binfile
change the protocol to Zmodem or Ymodem then hit Send
Turn your reciver on and wait while the transfer is completed

you are welcome to ask whaterver question you might have regarding the info I shared here with you and I will try to respond as soon as I can. Be amaregnam meteyek yichalale.

Have a nice Week!
/KSTAR

loderus sam?

awsome wrote:

loderus sam?

Have you tried hyperterminal?

yehenen softwaer apgered lemadereg stepun betngerun kstar or sami pls

jack0927 wrote:

yehenen softwaer apgered lemadereg stepun betngerun kstar or sami pls

If you want to do it by connecting with another reciever,

you can find the steps Here

If you however want to do it from your computer,
you could look in this same thread on page two.

---

ጠቃሚ ሆኖ ያገኙትን መረጃ(post) (+)ን በመጫን ጠቃሚነቱን ይግለፁ፡፡

k pc gares kstar? Be euro star 9200 s endet adrige new stepun tnx

jack0927 wrote:

k pc gares kstar? Be euro star 9200 s endet adrige new stepun tnx

ለዛ ሞዴል የሚሆን ሎደር እዚሁ ፎረም ላይ አለ (loader for all eurostar)
የሚለዉ ዉስጥ ብትፈልግ ታገኝዋለህ፡፡

እሱን ኢንስቶል አድርግና ከዛ ኮምፒዩተርህን ከሪሲቨሩ ጋር በrs232 cable(croosed) አገናኝ፡፡
ከዛ ለጥንቃቄ መጀመሪያ ዳምፕ አድርግ፡፡ ምናልባት አልሰራ ቢልህ ወደ ነበረበት ለመመለስ ይረዳሃል፡፡
ከዛ ብሮውዝ አድርግና አዲሱን ሶፍትዌር አስገባ፡፡ ኦልኮድ የሚለዉን መርጠህ ቀጥል ትለዋለህ፡፡
ሳይጨርስ አታቋርጠው፡፡

---

ጠቃሚ ሆኖ ያገኙትን መረጃ(post) (+)ን በመጫን ጠቃሚነቱን ይግለፁ፡፡

b rs cebel megenagnetun b men awkalew kstar pls

jack0927 wrote:

b rs cebel megenagnetun b men awkalew kstar pls

እዚሁ ቶፒክ ላይ ገፅ ሁለት ላይ አለ hyperterminal ተጠቅመህ ስትሞክረው ኬብሉ ኮኔክት ማድረግ አለማድረጉን ትረዳለህ፡፡ ሪሲቨሩን ስታስነሳው ሃይፐርተርሚናሉ ላይ ፅሁፍ ስለሚመጣ፡፡

ሎደሩም እኮ ኮኔክት ማድረግ ካልቻለ ታይም ኦውት አለው መላክ አልቻልኩም ይልሃል፡፡

b sm 9200 lay endet new yamichanew stepun pls

jack0927 wrote:

b sm 9200 lay endet new yamichanew stepun pls

እሱን ደግሞ የሱፐርምክስ ቦታ ላይ ብትጠይቀው ለመከታተል ያመቻል፡፡
ከላይ የተሰጡህ መልሶች ስለ ይሮስታር ላነሳሃቸው ነጥቦች መልስ ከሰጡህ ፎሎው አፕ መልስ ብታደርግ ጥሩ ይሆናል፡፡

---

ጠቃሚ ሆኖ ያገኙትን መረጃ(post) (+)ን በመጫን ጠቃሚነቱን ይግለፁ፡፡

ok eshe euro star or euro box softwaer apgered eyadereku maberat betafa na stak beyaderg bemen mastekakel echilalew tnx kstar

jack0927 wrote:

ok eshe euro star or euro box softwaer apgered eyadereku maberat betafa na stak beyaderg bemen mastekakel echilalew tnx kstar

እዚሁ ከላይ በሰጠሁህ መልስ ሪሲቨሩን መጀመሪያ dump አድርግ ያልኩህ ለዛም ጭምር ነው፡፡ ከተበላሸ ያንን እንድትከትበት፡፡

---

ጠቃሚ ሆኖ ያገኙትን መረጃ(post) (+)ን በመጫን ጠቃሚነቱን ይግለፁ፡፡

rs kebel b jostek lemaserat yemekataluten gemadoch kelerachwen lemesale red-yalow endeza adergeh post aderglen 2 degmo softwaerun lecenebat sel read dump cdm1 error! Yelal pls men ladergew tnx kstar

jack0927 wrote:

rs kebel b jostek lemaserat yemekataluten gemadoch kelerachwen lemesale red-yalow endeza adergeh post aderglen 2 degmo softwaerun lecenebat sel read dump cdm1 error! Yelal pls men ladergew tnx kstar

በመልቲ ሜትር የቱ ፒን ላይ የቱ እንዳለ ቼክ አድርግ፡፡ መልቲ ሜትር ከሌለህ የሆነ ዳዮድ ከባትሪ ጋር በ ሲሪየስ አስረህ እይ፡፡
ከዛ ሁለትን ከ ሶስት፣ ሶስትን ደግሞ ከሁለት፣ አምስትን ከአምስት አገናኝ፡፡
ቁጥሩ ኮምፕዩተርህ ላይ(ወንዴ ላይ) ከግራ ወደ ቅኝ ሲሆን የጆይስቲኩ ላይ ደግሞ ያው ፊሜል ስለሆነ ከ ቅኝ ወደ ግራ ይሆናል፡፡
ይሄን ባይንይ አይተህ ይገባሃል፡፡ ሶስቱም ፒኖች ከላይ ባለው መደዳ ያሉት ናቸው፡፡

ቀጥሎ ላነሳኸው ጥያቄ የትኛው ላይ በምን ልትጭን እንደሞከርክ እና በ hyperterminal ኮኔክት ማድረጉን እንዳየህ ብታስረዳ ችግሩን ለመገመት ይረዳል፡፡

hypermtlanun mechan alchalcum yemokerkut degmo b euro star loder new

jack0927 wrote:

hypermtlanun mechan alchalcum yemokerkut degmo b euro star loder new

There is nothing to install to make hyperterminal work, just place the .dll and .exe file in the same folder and run it in windows xp3 compatibility mood if you are not already in xp3.

Or you can just enable yourown hyperterminal for windows by going into program files and selecting windows program and then hyperterminal from the list. If you are in xp then hyperterminal can be accessed from program>accessibilyt>communication location.
The setting for hyperterminal has already been discussed in this forum. Creat a new file and adjust the settings as discussed above.

---

ጠቃሚ ሆኖ ያገኙትን መረጃ(post) (+)ን በመጫን ጠቃሚነቱን ይግለፁ፡፡

computaru lay chack seral port resevaru lay menem ayenet meleket aymatm men sehon new pls and b eurostar 9200 lay yaschigeral wey tnx

computaru lay chack seral port resevaru lay menem ayenet meleket aymatm men sehon new pls and b eurostar 9200 lay yaschigeral wey tnx

sami&kstar pls pls yehone neger belu enje

jack0927 wrote:

sami&kstar pls pls yehone neger belu enje

ይሄ ሎደር ለዚ ሞዴል የሚሆንህ አይመስለኝም፡፡
በየትኛው ሞዴል ምን እየሞከርክ እንደሆንክ እኮ አልገለፅክም፡፡

Normally "Check serial port status" የሚለው ላይ ዝም ብሎ የሚቆመው serial comunication port(com port)
በትክክል ኮንፊገር ካልሆነ ወይም ደግሞ ከሪሲቨሩ ጋር መነጋገር ካልቻለ(ምላሽ ካጣ) ነው፡፡
Device manager ላይ ያለው ሲሪያል ፖርት ነምበር እዚ ሎደሩ ጋር ካለው ጋ ተመሳሳይ መሆን አለበት፡፡

ፖርትህ በትክክል ኮንፊገር መሆኑን በhyperterminal ቼክ ማድረግ ነው የሚቀለው ከላይ እንደተገለፀው፡፡

---

ጠቃሚ ሆኖ ያገኙትን መረጃ (+)ን መጫን አይርሱ፡፡

eyemokekut yalehut all euro star loders bemilew new memokerew digmo eb 9700 gold + new 2 hypertermin degemo selk kuter menmen yetayekal haypeertemin degemo be mendenew y mecahnew wendow xp lay new tnx

jack0927 wrote:

eyemokekut yalehut all euro star loders bemilew new memokerew digmo eb 9700 gold + new 2 hypertermin degemo selk kuter menmen yetayekal haypeertemin degemo be mendenew y mecahnew wendow xp lay new tnx

ሎደሩ ለዚ ሞደል አይሆንም፡፡